Papel Emerald Palm

Peel And Stick / 50Cm X300Cm

€60,23 EUR

Papel Emerald Palm

€60,23 EUR

Emerald Palm Heritage – Exuberancia Botánica y Refinamiento Tropical

La majestuosidad de la naturaleza en su estado más puro: una inmersión sensorial en el lujo orgánico.

Transforme su residencia en un oasis de distinción con el Emerald Palm Heritage, un mural que redefine el concepto botánico mediante una ejecución artística de alta fidelidad. Este diseño captura la arquitectura de las palmeras tropicales en un verde esmeralda profundo, aportando una frescura sofisticada que expande los límites visuales de cualquier estancia. Diseñado para interiores que buscan un diálogo entre el exterior y el confort privado, este mural se convierte en el epicentro de la decoración, ideal para salones de techos altos, suites de lujo o espacios de bienestar que exigen una estética serena, poderosa y atemporal.

Ingeniería Visual y Textura Botánica

Atributo de Lujo	Detalle de Ingeniería Estética
Arquitectura Tropical-Grandeur	Diseño de follaje a gran escala que aporta una profundidad escénica y una sensación de altura arquitectónica.
Paleta Deep Emerald	Pigmentos seleccionados para ofrecer una gama de verdes vibrantes y naturales que armonizan con materiales nobles.
Dualidad Texturizada	Disponible en configuración Peel & Stick para una renovación ágil o Traditional para un acabado de artesanía mural.
Definición High-Precision	Impresión de grado artístico que captura cada nervadura y detalle del trazo botánico con nitidez absoluta.
Atmósfera Sanctuary-Luxe	Composición pensada para crear puntos focales que invitan al descanso y elevan el bienestar emocional en el hogar.

How to apply our wallpaper?

STEP 1: Prepare the wall surface

Your wall must be completely flat, clean and dry. Levels rough surfaces, rough, holes and uneven spots.
Your wall should be a uniform color. If not, you may notice differences in color on your wall once installed. If your wall has multiple colors, we recommend that you paint again.
Make a vertical line with a plumb line on the left edge of the area you want to cover with the mural. If you have a plumb, one can make your own by tying a heavy object on the end of a rope. This line is very important because it is the guide to start placing your mural.

STEP 2: Prepare the wallpaper

The wallpaper panels are made with a width of 50 cm(19.7"). Panels are received printed continuously on a roll and numbered at the top.
Cut independent panels and do a preview on the ground following the numerical order from left to right.
Measure with a meter the height of your wall. If it's less than the photomural, you must cut it to fit properly. Do it while you have it on the floor but leave a margin of an inch to correct any differences in level on the wall.

STEP 3: Prepare the glue

You may buy the glue from your supermarket, confirm it's for non-woven wallpaper use.
Prepare the glue following the instructions on the bag of the glue you bought. Do it slowly. So you will obtain a uniform mixture and without bubbles.

STEP 4: Attach the paper to the wall

Applying glue on the wall evenly using a brush or a paint roller. Start distributing from the line you marked as a guide to the plummet. Don't paste the entire wall, do it only in the area that will cover the first panel on the left, leaving a few inches outside the right.
Apply the first panel of the mural on the wall starting at the top left. Check that is aligned with the guide.
Presses against the paper with a dry roller or sponge to remove any air bubbles.
Place the following panels in the same way in numerical order. The panels must not be mounted on each other but are set on edge.
Clean the excess glue with a damp sponge.

STEP 5: Finishing

With the help of a ruler and a cutter, adjust the sides and the top and bottom of the wall if necessary.
Let dry 24 hours; you will get a perfect final result